Not super tight since I didn’t want to put dents in the woods.Īfter the glue had completely dried overnight, I took it to my Ryobi belt sander to square and even things up. I made sure the glue was spread thoroughly around the wood and then used a c-clamp to press the wood together. I used Titebond III glue, but any yellow wood glue will do. So I cut out a piece of oak close to the same dimensions of my box and between 1/2 to 3/4 inch thick. I really wanted to use a darker wood like walnut, but all I had on hand was red oak. So, I decided to make my lid about 1/4 to 1/3 of the total box height.Īfter looking at other boxes over the internet, I decided half-way into the project to laminate a different wood for contrast. I didn’t go for any magical dimensions, but what I thought looked good. I never like to get my finger too close to the blade. Note that since the piece is on the short side, I used a clamp to hold the wood in place. Made some initial cuts for the box lid, using my miter saw. This Zebra board was 3 inches by 3 inches wide. A hardwood is always a great choice for durability and beauty. I decided to use this leftover piece of Zebra Wood. Stop and get help or ask for advice - if you don’t feel safe. And don’t do something you’re not comfortable doing. Here are some of the tools/materials I used:ĭEWALT 12 Inch Sliding Compound Miter Saw And - I will share my frustrations lessons learned along the way. In this post, I’ll share a quick tutorial for making the handmade ring box. But this is one of the exciting points about woodworking: Not everything has to conform to the original plan. The good thing is I learn a lot in the process. This was one of those projects where I kept running into glitches. *Please note that each box will be unique and may vary slightly from the photos, as there are natural variations in the wood grain.First, let me confess. Check out all of our other listings by clicking the Wanderweg Shop icon above. We also offer different style ring boxes (including boxes for a single ring only). *If your ring(s) are too tall or large to fit in the box, please message us and we'll work with you to create an appropriately sized box. The holes carved into the lid and bottom are 1-1/4"L x 1-1/4"W at their widest. Overall dimensions are approximately 1-3/4"L x 3/4"H x 2-7/8"W (including lid) Holds two rings with a setting of up to 7/16" wide The box's interior cutouts are lined with a smooth black fabric to keep the rings secure and protected. Use it to hold a wedding ring + engagement ring set, or to hold both of your wedding bands. The lid and box are connected by two elegant brass hinges, and the back of the box is chamfered so it's easy to tell which way it opens. The box is sealed with a natural stain to enhance and protect the wood grain. This double ring box is carefully carved from a quality wood of your choice: Walnut, Maple, Oak, Mahogany, Cherry or Purpleheart. If you want a different style/font/image please message us at wanderwegshop and we'll do our best to accommodate. This wedding ceremony ring box can be personalized with names, dates, places or image of your choosing, perfect for a wedding or travel!Īt checkout, please include the text with the font option you prefer or image selection you would like engraved on the box.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |